1994 Mazda Eunos

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

General underbody corrosion

Rear arch corroded

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

General underbody corrosion

Rear arch corroded

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced sills (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced sills corroded (6.1.1 (c) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced sills corroded (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced sills corroding (6.1.1 (c) (i))

Emissions not tested (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced sills corroding (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

slight corrosion to offside rear outer sill

Nearside Front coil spring broken (2.4.C.1a)

Offside Rear coil spring broken (2.4.C.1a)

Nearside Rear coil spring broken (2.4.C.1a)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

major oil leak

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Brakes imbalanced across an axle (3.7.B.5b)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

major oil leak

Parking brake: efficiency below requirements (3.7.C.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)