2014 Peugeot 208

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge 195/55/16 H (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened Both sides (1.1.14 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Wishbone arm front and rear bushes (5.3.4 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Axle main mounting bush (5.1.2 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule Both hoses (1.1.12 (f) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Wishbone arm front and rear bushes (5.3.4 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Axle main mounting bush (5.1.2 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule Both hoses (1.1.12 (f) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Heat shield insecure

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Both sides (1.1.14 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Wishbone arm front and rear bushes (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Axle main mounting bush (5.1.2 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule Both hoses (1.1.12 (f) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Wishbone arm front and rear bushes (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge Worn on both edges. Very close to N/S/ F (5.2.3 (e))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Axle main mounting bush (5.1.2 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule Both hoses (1.1.12 (f) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Heat shield insecure

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone arm front and rear bushes (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge worn on outer edge (5.2.3 (e))

Nearside Rear Brake hose has slight corrosion to ferrule hose into caliper (1.1.12 (f) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone arm front and rear bushes (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge worn on outer edge (5.2.3 (e))

Offside Rear Brake hose has slight corrosion to ferrule hose into caliper (1.1.12 (f) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Windscreen wiper blade defective (3.4 (b) (i))

rear brake binding (3.7.B.1)

Exhaust system not adequately supported front and rear brackets broken (7.1.1)

rear brake binding (3.7.B.1)

Exhaust tail pipe front hanger bracket corroded through and adrift.

Offside Front Lower Exhaust centre pipe front hanger bracket weld detached.

Under trays fitted covering underside components.