2006 Ford Ka

Central Front Lower Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Lower jacking point corroded (non-excessive)

Nearside Front Lower Suspension arm pin or bush excessively worn rear bush detatched (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened X 2 (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake hose slightly twisted (1.1.12 (b) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm ball joint excessively worn PLUS ball joint boot and bushes (5.3.4 (a) (i))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened X 2 (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake hose slightly twisted (1.1.12 (b) (i))

Central Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning high level stop light (4.3.1 (a) (i))

Coolant leak from coolant bottle cap ()

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced near front subframe rear bolt (6.1.1 (c) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced near front subframe rear bolt (6.1.1 (c) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced outer body sill (6.1.1 (c) (i))

Offside Rear light lens cracked

Oil leak, but not excessive engine (8.4.1 (a) (i))

clutch bite high

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Road wheel badly distorted (5.2.2 (c) (i))

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Central Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning high level stop light (4.3.1 (a) (i))

Coolant leak from coolant bottle cap ()

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced near front subframe rear bolt (6.1.1 (c) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced near front subframe rear bolt (6.1.1 (c) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced outer body sill (6.1.1 (c) (i))

Offside Rear light lens cracked

Oil leak, but not excessive engine (8.4.1 (a) (i))

clutch bite high

condensation in offside headlamp

damage to nearside rear wheel rim

offside front tyre wearing on edge

wear on discs

Nearside Front coil spring broken (2.4.C.1a)

Offside Front coil spring broken (2.4.C.1a)

condensation in offside headlamp

damage to nearside rear wheel rim

offside front tyre wearing on edge

wear on discs

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Oil leak ()

condensation in offside headlamp

damage to nearside rear inner wheel rim

sidewall separating on offside rear tyre

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

offside beam pattern inconclusive

Nearside rear tyre perished

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)

Offside Rear Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)

Nearside Headlamp aim too low (1.8)

Nearside rear tyre perished

Offside Headlamp aim too low (1.8)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside front tyre wearing unevenly

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp not working on dipped beam (1.7.5a)