2002 Yamaha DT125

Front Direction indicator missing (1.5.1a)

Front Horn not working (1.7.3a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Lower Rear mono-shock pivot excessively worn (2.4.B.4)

Nearside Indicator switch insecure out of reach (1.5.4)

Rear Direction indicator missing (1.5.1a)

Rear Footrest missing (6.2.1a)

Rear Registration plate delaminated (6.3.1.d)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear shock absorber insecurely mounted bearings worn (2.4.A.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Nearside stand snapped --missing

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering movement slightly 'notchy' (2.2.1a)

no indicators fitted

Front Wheel spoke slightly loose. (4.2.1b)

Lower Rear suspension bearing has slight free play (2.4.A2a(i))

Rear suspension bearing has slight free play (2.4.A2a(i))

Steering movement slightly 'notchy' (2.2.1a)

Offside Rear Brake lever is short but brake can still be readily applied (3.1.3c)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Wheel has an excessively distorted bead rim. (4.2.2)

Headlamp aim too low (1.6)

Headlamp switch faulty (1.2.4)

Rear Floor brake test indicates a binding brake (3.3.C2c)

Drive chain worn to excess (6.2.1e)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)