2002 Triumph Tiger

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain excessively tight (6.1.7 (k) (i))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Stop lamp switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Wheel spoke slightly bent. (4.2.1b)

Steering movement slightly 'notchy' (2.2.1b)

Front Brake disc(s) slightly worn (3.2.A1l)

Steering movement slightly 'notchy' (2.2.1b)

Horn not working (1.7.3a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Steering movement slightly 'notchy' (2.2.1b)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Brake component worn but not seriously reduced in strength (3.2.A1)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Motorcycle structure slightly damaged (6.1.1a)

Rear Brake component worn but not seriously reduced in strength (3.2.A1)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel spoke slightly bent. (4.2.1b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Brake disc(s) slightly worn (3.2.A1l)

Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Front Roller brake test indicates a binding brake (3.3.A1a)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Horn not working (1.7.3a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

rear brake pads near limit

steerings bearing getting knotchy