MOT Status
ValidMileage
51,478 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Offside Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Rear drum back plate corroded
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Nearside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
surface corrosion to suspension and brake components
Brake fluid contaminated (1.8 (a))
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Nearside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
surface corrosion to suspension and brake components
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Offside Rear hand brake low reading
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
handbrake travel high
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
handbrake travel high
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
How Reliable is the Kia Rio?
Based on 1,637,344 MOT tests across 141,212 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LB06 CNC is a 2006 Kia Rio in Silver with a 1,399cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 85%.
Across all 2006 Kia Rio models, the average MOT pass rate is 70.7% with a typical mileage of 61,115 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Kia Rio fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 34,517 recorded failures. If you're considering buying LB06 CNC, it's worth having these areas checked by a mechanic before committing.
The Kia Rio typically stays on UK roads for around 25 years. At 20 years old, this Kia Rio is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of LB06 CNC?
You can check the full history of LB06 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LB06 CNC registered?
LB06 CNC is a 2006 Kia Rio, first registered on 11 May 2006.
Is LB06 CNC safe to buy?
The MOT history for LB06 CNC shows 20 tests with a 85% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LB06 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LB06 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.