2006 Chrysler Pt Cruiser

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

headlamps glazed

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Horn not working (7.7 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

headlamps glazed

Central Stop lamp(s) with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii))

Emissions not tested overheating (8.2.1.2 (d))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Exhaust system insecure (6.1.2 (a))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Horn not working (7.7 (a) (ii))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Front Headlamp aim too low Both Fronts (4.1.2 (a))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Headlamp aim too low (1.8)

Offside Rear Stop lamp insecure (1.2.1a)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Horn not working (1.6.2a)

Offside Headlamp aim too high (1.8)

Offside Stop lamp not working (1.2.1b)

Nearside front brake binding (3.7.B.1) DANGEROUS

Offside front brake binding (3.7.B.1) DANGEROUS

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)