2006 Mercedes-benz Clk

Brake hose slightly deteriorated all four (1.1.12 (b) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement n/s and o/s inner (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

undertrays and sill covers fitted not allowing full inspection

Brake hose slightly deteriorated all 4 (1.1.12 (b) (ii))

Coil spring corroded All 4 heavily corroded (5.3.1 (b) (i))

Front Exhaust mounting defective Both front exhaust mounts fractured but system still secure (6.1.2 (a))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both front lower suspension arm inner bushes splitting and cracking and have slight movement (5.3.4 (a) (i))

Nearside Front Side repeater lens defective which has no effect on emitted light lense in mirror (4.4.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm ball joint has slight play Lower rear arm ball joint (5.3.4 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension arm corroded but not seriously weakened All rear suspension arms - lowers have covers over them (5.3.3 (b) (i))

rear exhaust heatshield loose

sill covers, undertrays and suspension arm covers fitted

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Brake hose slightly deteriorated all 4 (1.1.12 (b) (ii))

Coil spring corroded All 4 heavily corroded (5.3.1 (b) (i))

Front Exhaust mounting defective Both front exhaust mounts fractured but system still secure (6.1.2 (a))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both front lower suspension arm inner bushes splitting and cracking and have slight movement (5.3.4 (a) (i))

Nearside Front Side repeater lens defective which has no effect on emitted light lense in mirror (4.4.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm ball joint has slight play Lower rear arm ball joint (5.3.4 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension arm corroded but not seriously weakened All rear suspension arms - lowers have covers over them (5.3.3 (b) (i))

rear exhaust heatshield loose

sill covers, undertrays and suspension arm covers fitted

Front Exhaust mounting defective Both front mounts detatched - system still secure (6.1.2 (a))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened rear arm (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Lower front rear bush splitting (5.3.4 (a) (i))

Nearside Front Side repeater lens defective which has no effect on emitted light Indicator in mirror (4.4.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened Rear arm (5.3.3 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement lower front rear bush splitting (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust heat shield loose

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

sill covers and undertrays fitted

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Exhaust mounting defective Both front mounts detatched - system still secure (6.1.2 (a))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened rear arm (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Lower front rear bush splitting (5.3.4 (a) (i))

Nearside Front Side repeater lens defective which has no effect on emitted light Indicator in mirror (4.4.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened Rear arm (5.3.3 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement lower front rear bush splitting (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust heat shield loose

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

sill covers and undertrays fitted

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

both front exhaust mount supports broken - system still secure

sills and underside of vehicle covered by trims

Nearside Front Road wheel fractured (5.2.2 (a)) DANGEROUS

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Brake pad(s) wearing thin both NSR NSR (1.1.13 (a) (ii))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords side wall (5.2.3 (d) (i))

Wheel bearing has slight play both OSF NSF (5.1.3 (a) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords tread depth 3mm (5.2.3 (d) (i))

Brake pad(s) wearing thin both NSR NSR (1.1.13 (a) (ii))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords side wall (5.2.3 (d) (i))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Wheel bearing has slight play both OSF NSF (5.1.3 (a) (i))

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front tyre has slight damage to outer sidewall

Nearside Front tyre has slight damage to outer sidewall

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Front Brake pad(s) wearing thin (3.5.1g)