MOT Status
ExpiredMileage
119,296 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Headlamp aim projected beam image is obviously incorrect both headlamp dipped beam images not clear. (4.1.2 (c))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/sill within 12"of suspension arm forward mounting. (5.3.6 (a) (i))
Front front brake discs are of incorrect size ,but brake efficiency good.
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis /floor close to suspension arm mounting. (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge scrubbed on inside edge close to limit nearly exposing cords. (5.2.3 (e))
Rear Exhaust mounting defective corroded and broken. (6.1.2 (a))
Rear Towbar slightly corroded within 30cm of towbar mounting mounting area for towbar and towbar corroded but not excessive. (6.1.6 (i) (i))
extensive surface corrosion on rear subframe and suspension components.
Nearside Rear Tyre worn close to legal limit/worn on edge approx 2mm tread depth. (5.2.3 (e))
Offside Rear tyre scrubbed on inside edge.
Rear Exhaust mounting defective bracket corroded and broken. (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened and associated parts have extensive surface corrosion. (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive rear subframe and trailing arm mount areas. (5.3.6 (a) (i))
Headlamp aim projected beam image is obviously incorrect no image readable light output foggy both headlamps. (4.1.2 (c))
Offside Front Tyre has ply or cords exposed on inside edge. (5.2.3 (d) (ii)) DANGEROUS
Nearside Front tyre scrubbing on inside edge.
Nearside Rear Tyre worn close to legal limit/worn on edge approx 2mm tread depth. (5.2.3 (e))
Rear Exhaust mounting defective bracket corroded and broken. (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened and associated parts have extensive surface corrosion. (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive rear subframe and trailing arm mount areas. (5.3.6 (a) (i))
Windscreen washer not working (3.5 (a))
extensive surface corrosion on rear suspension components and chassis.
Headlamp aim beam image obviously incorrect both headlamps provide no image. (1.8.A.1b)
Headlamp excessively deteriorated so that the light output is severely reduced both lenses fogged reducing intensity. (1.7.5a)
Offside Rear Brake pipe inadequately clipped to flexible hose. (3.6.B.1)
Offside Rear Tyre has ply or cords exposed scrubbed on inner face. (4.1.D.1b)
exhaust deteriorated outer skin seperating.
exhaust heat deflector corroded and damaged and fowling exhaust system.
extensive surface corrosion on rear suspension components and chassis.
Items removed from driver's view prior to test ()
Nearside Front Inner edge scrubbing
Nearside Front front brake fluctuating, but not excessively (3.7.B.3)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Brake pipe slightly corroded end (3.6.B.2c)
Offside Rear Inner edge scrubbing
covers fitted
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement back bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement back bush (2.4.G.2)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 205/55 R16 (4.1.D.1a)
Offside Front Windscreen wiper blade insecure 24" (8.2.2)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Rear Brake pipe excessively corroded end (3.6.B.2c)
Items removed from driver's view prior to test ()
Nearside Front Inner edge scrubbing
Nearside Front front brake fluctuating, but not excessively (3.7.B.3)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Brake pipe slightly corroded end (3.6.B.2c)
Offside Rear Inner edge scrubbing
Windscreen washer provides insufficient washer liquid (8.2.3)
covers fitted
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on dipped beam (1.7.5a)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Engine covers fitted obscuring some components in the engine bay
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Items removed from driver's view prior to test
Nearside Inner Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Under-trays fitted obscuring some underside components
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Engine covers fitted obscuring some components in the engine bay
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Items removed from driver's view prior to test
Nearside Inner Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Under-trays fitted obscuring some underside components
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Suspension arm has slight play in a track control arm inner bush (2.5.B.2b)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Offside Front Suspension arm has slight play in a track control arm inner bush (2.5.B.2b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
part of exhaust slightly corroded
Nearside Front Suspension arm has slight play in a track control arm inner bush (2.5.B.2b)
Offside Front Suspension arm has slight play in a track control arm inner bush (2.5.B.2b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
part of exhaust slightly corroded
How Reliable is the Ford Focus C-max?
Based on 1,326,487 MOT tests across 79,932 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LB06 ZNY is a 2006 Ford Focus C-max in Red with a 1,753cc diesel engine. This vehicle has been through 17 MOT tests with a personal pass rate of 58.8%.
Across all 2006 Ford Focus C-max models, the average MOT pass rate is 73.4% with a typical mileage of 70,386 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Focus C-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 67,238 recorded failures. If you're considering buying LB06 ZNY, it's worth having these areas checked by a mechanic before committing.
The Ford Focus C-max typically stays on UK roads for around 23 years. At 20 years old, this Ford Focus C-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of LB06 ZNY?
You can check the full history of LB06 ZNY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LB06 ZNY registered?
LB06 ZNY is a 2006 Ford Focus C-max, first registered on 12 June 2006.
Is LB06 ZNY safe to buy?
The MOT history for LB06 ZNY shows 17 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LB06 ZNY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LB06 ZNY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.