MOT Status
ExpiredMileage
92,517 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Rear Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Windscreen damaged but not adversely affecting driver's view cracked (3.2 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
under chassis and suspension corroded
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Stop lamp(s) non-obligatory stop lamp not working high level (4.3.1 (a) (ii))
corrosion n/s/f inner sill not prescribed area
surface corrosion suspension components
exhaust rusty
winter tyres fitted and slightly perished
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt x 2 (5.3.4 (b) (ii))
Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt x 2 (5.3.4 (b) (ii))
Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both rear (5.3.4 (a) (i))
Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive Both rear lower arms (5.3.6 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive Rear subframe, axle and trailing arms all have corrosion (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front tyres worn unevenly.
Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring worn (2.4.C.1b)
Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Power steering fluid level low, but not below minimum on minimum (2.3.1)
general underbody surface corrosion.
Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement axle bush (2.4.G.2)
Offside Front coil spring worn (2.4.C.1b)
Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement axle bush (2.4.G.2)
Power steering component(s) has slight seepage from a component (2.3.3b)
Power steering fluid level low, but not below minimum (2.3.1)
Front Brakes imbalanced across an axle (3.7.B.5b)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LB07 CVC is a 2007 Mazda 6 in Grey with a 1,999cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 77.8%.
Across all 2007 Mazda 6 models, the average MOT pass rate is 73.6% with a typical mileage of 75,411 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying LB07 CVC, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 19 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of LB07 CVC?
You can check the full history of LB07 CVC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LB07 CVC registered?
LB07 CVC is a 2007 Mazda 6, first registered on 25 June 2007.
Is LB07 CVC safe to buy?
The MOT history for LB07 CVC shows 18 tests with a 77.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LB07 CVC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LB07 CVC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.