MOT Status
ExpiredMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pedal has insufficient reserve travel (1.1.2 (a))
Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS
Both front inner tie rods have slight play
Front brake discs are corroded and lipped
Rear brake discs are corroded
Nearside Front Valve stem slightly damaged (4.1.D.1e)
Central Stop lamp has less than 50% of the light sources illuminating (1.2.1b)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Stop lamp remains on when the brakes are released (1.2.1e)
Nearside Front Valve stem slightly damaged (4.1.D.1e)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Windscreen washer provides insufficient washer liquid (8.2.3)
nearside rear tyre splitting and cracking
Nearside Rear Direction indicator not working (1.4.A.2c)
Nearside Side repeater incorrect colour (1.4.A.2f)
Offside Rear Direction indicator not working (1.4.A.2c)
Offside Side repeater incorrect colour (1.4.A.2f)
Power steering fluid level below minimum (2.3.1)
Rear engine mounting deteriorated resulting in excessive movement (6.1.D.1a)
nearside rear light full of water
nearside rear tyre splitting and cracking
power steering pipes damp
Nearside Stop lamp not working (1.2.1b)
Offside Stop lamp not working (1.2.1b)
nearside rear tyre perishing and has cut in sidewall
nearside rear tyre perishing and has cut in sidewall
An item not tested (Manual)
An item not tested (Manual)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance (1.2.1d)
Rear Stop lamp remains on when the brakes are released (1.2.1e)
Front Brake pad(s) wearing thin (3.5.1g)
nearside rear tyre has cut in sidewall
Offside Stop lamp not working (1.2.1b)
Exhaust has a major leak of exhaust gases (7.1.2)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Centre Stop lamp remains on when the brakes are released (1.2.1e)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Registration plate lamp not fitted (1.1.C.1b)
Nearside Stop lamp not working (1.2.1b)
Nearside Stop lamp remains on when the brakes are released (1.2.1e)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Registration plate lamp not working (1.1.5c)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2) DANGEROUS
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2) DANGEROUS
Nearside Front Headlamp aim too low (1.8)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Headlamp aim too low (1.8)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear registration plate deteriorated (6.3.1d)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front brake disc slightly scored (3.5.1h)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Front Shock absorber has a light misting of oil (2.7.3)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LB51 BUP is a 2001 Peugeot 206 in Blue with a 1,997cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 52.2%.
Across all 2001 Peugeot 206 models, the average MOT pass rate is 66.3% with a typical mileage of 67,765 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying LB51 BUP, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 25 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of LB51 BUP?
You can check the full history of LB51 BUP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LB51 BUP registered?
LB51 BUP is a 2001 Peugeot 206, first registered on 31 October 2001.
Is LB51 BUP safe to buy?
The MOT history for LB51 BUP shows 23 tests with a 52.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LB51 BUP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LB51 BUP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.