2003 Mercedes-benz C

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Exhaust has a major leak of exhaust gases Rear exhaust section damaged thus causing a leak (6.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Indicator switch inoperative Indicators fail to stay on when engaged both sides (4.4.2 (a) (ii))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Coil spring fractured or broken Top mount may also be damaged (5.3.1 (b) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Suspension arm ball joint has slight play Ball joint facing upwards (Marked) (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material Connecting to brake flexi pipes (1.1.11 (c))

No dipstick in tube

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material Connecting to brake flexi pipes (1.1.11 (c))

Under trays fitted not allowing for full inspection

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Nearside Front Lower Suspension arm pin or bush excessively worn rear arm (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front disc worn

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front disc worn

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front coil spring broken (2.4.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Items removed from driver's view prior to test

emissons limits service

service light on

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Items removed from driver's view prior to test

Offside Stop lamp not working (1.2.1b)

emissons limits service

service light on

Nearside Registration plate lamp not working (1.1.C.1d)

Headlight lenses are going opaque

Rear exhaust mount has been removed

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)