2006 Mercedes-benz Cls

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Noise from steering column when turning, no excess play at time of test

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Noise from steering column when turning, no excess play at time of test

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Suspension arm ball joint excessively worn rear (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Suspension arm pin or bush worn but not resulting in excessive movement Both front, Front arm bushes worn (5.3.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge worn very low at inner edge (5.2.3 (e))

Rear Exhaust mounting defective two mounting brackets broken (6.1.2 (a))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge worn very low at inner edge (5.2.3 (e))

Rear Exhaust mounting defective two mounting brackets broken (6.1.2 (a))

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

full vehicle under-tray fitted - not allowing a full inspection

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 245/40 18 (4.1.D.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

full vehicle under-tray fitted - not allowing a full inspection

Nearside Front Inner Road wheel with a slightly distorted bead rim (4.2.A.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Tyre has ply or cords exposed 245/40 18 (4.1.D.1b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

o/s/f tyre wearing on edges

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

both n/s tyres have cuts to sidewall not to cords

Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front wheel bearing has slight play (2.5.A.3c)

both n/s tyres has cuts in sidewalls not to cords

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

advise offside front and rear tyres wear inner edge