2006 Ford Ka

Oil leak, but not excessive (8.4.1 (a) (i))

Central Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill back plate. (7.1.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

underside of vehicle heavily corroded.

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 165/65/14 (5.2.3 (d) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 165/65/14 (5.2.3 (d) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Inner Floor excessively deteriorated sill to floor (6.2.4 (a) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Offside Front Inner Floor excessively deteriorated sill to floor (6.2.4 (a) (i))

Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Exhaust mounting defective centre (6.1.2 (a))

Nearside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake hose slightly damaged flexi to brake pipe mounting loose (1.1.12 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

fuel fill neck corroded

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Brake hose excessively twisted fouling wheel (1.1.12 (b) (ii))

Nearside Front Brake hose slightly damaged flexi to brake pipe mounting loose (1.1.12 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

fuel fill neck corroded

Emissions unable to be completed DUE TO EXHAUST (8.2.1.2 (d))

Front Exhaust has a major leak of exhaust gases FLEXY (6.1.2 (a))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced WING (6.1.1 (c) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Brake hose excessively twisted (1.1.12 (b) (ii))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Exhaust silencer insecure heat shield all loose (8.1.1 (b) (i))

Exhaust silencer insecure heat shield all loose (8.1.1 (b) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch\chassis leg (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Floor excessively deteriorated (6.2.4 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel recess (6.2.2 (d) (i))

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear age related cracking to sidewall

Offside Rear age related cracking to sidewall

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

os front and both rear tyres perishing

Nearside Front coil spring broken (2.4.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

os front and both rear tyres perishing

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)