2008 Honda Civic

front bumper loose

head lights in poor condition

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

front bumper loose

head lights in poor condition

All direction indicators not working (4.4.1 (a) (ii))

Central Exhaust silencer insecure (8.1.1 (b) (i))

Fuel pipe leaking (6.1.3 (b) (i))

Hazard warning lamps inoperative all (4.4.1 (e))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge @ limit (5.2.3 (e))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Obligatory mirror slightly loose (3.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge @ limit (5.2.3 (e))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement offside & nearside rear bushes cracking (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge worn on edges (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge close to limit/worn on edges (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened offside & nearside pitting (1.1.14 (a) (ii))

park brake on just met lower limit

under tray fitted front to rear

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement offside & nearside rear bushes cracking (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge worn on edges (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge close to limit/worn on edges (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened offside & nearside pitting (1.1.14 (a) (ii))

park brake on just met lower limit

under tray fitted front to rear

Front Brake pad(s) wearing thin Unable to fully see front inner brake pad condition (1.1.13 (a) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both sides rear bushes (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge Both sides (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Front Brake pad(s) wearing thin Unable to fully see front inner brake pad condition (1.1.13 (a) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both sides rear bushes (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge Both sides (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Brake disc worn, but not excessively both front discs (1.1.14 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened both rear discs (1.1.14 (a) (ii))

Front Inner Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush on both arms deteriorating (5.3.4 (a) (i))

both front tyres wearing heavily on shoulders

Nearside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Offside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nail in nearside rear tyre

Nearside driveshaft has a object rapped around its

Offside front brake fluctuation close to limit

Under-trays fitted obscuring some underside components

front brake imbalance close to limit

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear tyres perished

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)