2010 Yamaha Yzf R125

Nearside Rear Footrest insecure (6.2.12 (a))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

all lamps masked over so not tested. not to be used in restricted light

Headlamp aim projected beam image obviously incorrect dim headlamp with no obvious beam pattern (4.1.2 (c))

Horn not working When horn is pressed engine misfires and revs drop (7.7 (a))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake hose excessively twisted brake line kinked (1.1.12 (b) (ii))

Rear Brake pedal is positioned so that the brake cannot be readily applied fairing impeding brake operation (1.1.2 (d))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick brake pad crumbling and delaminated (1.1.13 (a)) DANGEROUS

Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Exhaust noisy (8.1.1 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Exhaust noisy (7.1.2)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Roller brake test indicates slight fluctuation of brake effort borderline (3.3.A1d)

Lower Rear suspension bush has slight free play linkage (2.4.A2a(i))

Rear Brake disc(s) slightly worn (3.2.A1l)

Headlamp aim too high (1.6)

Nearside Rear Footrest missing (6.2.1a)

Offside Rear Footrest missing (6.2.1a)

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Rear Brake disc(s) securing bolt(s) loose (3.2.A1g) DANGEROUS

Exhaust noisy (7.1.2)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Roller brake test indicates slight fluctuation of brake effort borderline (3.3.A1d)

Lower Rear suspension bush has slight free play linkage (2.4.A2a(i))

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Headlamp aim too high (1.6)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake disc(s) securing bolt(s) missing (3.2.A1g)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Front shock absorber seal failed and leaking oil (2.3.3)

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Rear Drive chain excessively loose (6.2.1d)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust noisy (7.1.2)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear reflector on motorcycle missing (1.4.1)

Registration plate with character(s) which are not the correct height (6.3.4a)