2009 Fiat Grande Punto

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Tyre has a lump, caused by separation or partial failure of its structure near side rear tyre worn out of shape (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

front of near side sill panel area badly damaged

Exhaust has a major leak of exhaust gases front flexi area blowing (6.1.2 (a))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Windscreen washer not working (3.5 (a))

front of near side sill panel area badly damaged

Emissions not tested due to excessive air leak (8.2.2.2 (e))

Nearside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Nearside Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Outer Tyre has ply or cords exposed side wall (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Tyre slightly damaged/cracking or perishing both nearside (5.2.3 (d) (ii))

Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

offside front tyre slightly worn inner edge

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

offside front tyre slightly worn inner edge

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front wiper blade worn

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Offside Front wiper blade worn

Offside Headlamp aim too high (1.8)

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Outer engine mounting deteriorated resulting in excessive movement (6.1.D.1a)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Shock absorber has a serious fluid leak (2.7.3)

offside rear shock damp

Front brake discs worn

Nearside front sill has crush damage, but not considered to compromise the structural integraty of the vehicle

Offside Headlamp aim too high (1.8)

Front brake discs worn

Nearside front sill has crush damage, but not considered to compromise the structural integraty of the vehicle