2003 Nissan Terrano

Front Prop shaft joint excessively worn (6.1.7 (c) (i))

Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Rear Exhaust system insecure (6.1.2 (a))

Rear Fuel tank leaking (6.1.3 (b) (i))

Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Central Exhaust system insecure (6.1.2 (a))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Road wheel fixing missing one wheelnut missing on all four wheels (5.2.1 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Rear Prop shaft joint excessively worn (6.1.7 (c) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Nearside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear body sill corroded outside prescribed area

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension component mounting repair covered in underseal chassis by suspension mount (5.3.6 (a) (i))

Offside Front Suspension component mounting repair covered in underseal shock mount turret (5.3.6 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear body sill corroded out side prescribed area

Offside Front Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis excessive corrosion in multiple areas around shock mount turret (5.3.6 (a) (i))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Tyre has ply or cords exposed inner edge (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear body sill corrosion out side prescribed area

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear outer body sill corrosion out side prescribed area

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive lower suspension arm bush mounting area (5.3.6 (a) (i))

Horn not working (7.7 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Suspension component mounting repair covered in underseal under side of car (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Upper Front suspension has slight play in an outer ball joint (2.5.B.2a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

mid and rear exhaust becoming corroded