2003 Honda VFR800A

Offside Front throttle not returning when relaesed

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Central Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Rear Brake binding but not excessively (1.2.1 (f))

Offside Front throttle not returning when relaesed

Central Lower engine oil over full

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Central Front tyre worn very uneven

Central Front Upper Steering headbearing slightly stiff or notchy Slight notch at central position. (2.2.2 (f) (i))

Central Lower Exhaust system corroded.

Central Rear Lower Shock absorber has a slightly worn bush Shock absorber and linkages have wear and slight play in bushes and pivots. (5.3.2 (c))

Front Tyre worn close to the legal limit Tyre also worn unevenly and starting to perish. (5.2.3 (e))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened Slightly pitted. (1.1.14 (a) (ii))

Nearside Front Fork leg dust seal perished.

Nearside Front Upper Clutch lever bent (6.2.7 (b))

Nearside Rear Lower Drive chain worn but not considered excessive (6.1.7 (c) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened Slightly pitted. (1.1.14 (a) (ii))

Offside Lower Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Offside Lower Exhaust heatshield corroded.

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, pitted or scored, but not seriously weakened Slightly worn and pitted. (1.1.14 (a) (ii))

Rear Nail in tyre Tyre has x2 nails in tread, also worn unevenly. ()

Rear Rear brake does not lock on roller test.

Central Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Shock absorber has a serious fluid leak Fork leg has a serious fluid leak, seals blown. (5.3.2 (b))

Central Front Upper Steering headbearing slightly stiff or notchy Slight notch at central position. (2.2.2 (f) (i))

Central Lower Exhaust system corroded.

Central Rear Lower Shock absorber has a slightly worn bush Shock absorber and linkages have wear and slight play in bushes and pivots. (5.3.2 (c))

Front Tyre worn close to the legal limit Tyre also worn unevenly and starting to perish. (5.2.3 (e))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened Slightly pitted. (1.1.14 (a) (ii))

Nearside Front Fork leg dust seal perished.

Nearside Front Upper Clutch lever bent (6.2.7 (b))

Nearside Rear Lower Drive chain worn but not considered excessive (6.1.7 (c) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened Slightly pitted. (1.1.14 (a) (ii))

Offside Lower Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Offside Lower Exhaust heatshield corroded.

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, pitted or scored, but not seriously weakened Slightly worn and pitted. (1.1.14 (a) (ii))

Rear Nail in tyre Tyre has x2 nails in tread, also worn unevenly. ()

Rear Rear brake does not lock on roller test.

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Throttle operating incorrectly (6.2.1f)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Clutch lever bent (6.2.1g)

Front Roller brake test indicates a binding brake (3.3.A1a)

Offside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))