2005 Mazda 5

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

NO OIL SHOWING ON DIPSTICK

Nearside Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Brake fluid contaminated (1.8 (a))

Offside Headlamp light intensity severely reduced bulb incorrectly fitted (4.1.4 (a))

Exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS

heat shield insecure

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front bumper insecure

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Exhaust has a major leak of exhaust gases back box (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front bumper insecure

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Rear registration plate faded but not likely to be misread (6.3.1d)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Rear registration plate faded but not likely to be misread (6.3.1d)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear exhaust heat shield adrift

Front Headlamp aim too high (1.8)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear exhaust heat shield adrift

center/rear exhaust heat shield loose

Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Front Brake pad(s) wearing thin (3.5.1g)

front wiper blades slpit

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)

Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Nail in rear tyre