2008 Kia Picanto

Emissions unable to be completed rear silencer split (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases rear silencer split (6.1.2 (a))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases flexi pipe (6.1.2 (a))

Nearside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Brake pipe corroded, covered in grease or other material centre main (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Parking brake efficiency requirements just met [16%]

surface corrosion to underside components

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Upper Brake pipe excessively corroded (1.1.11 (c))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area (5.3.6 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Parking brake efficiency requirements just met [16%]

surface corrosion to underside components

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear seat folded

Offside Rear tyre perished

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

rear number plate loose

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Exhaust system insecure (6.1.2 (a))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

rear number plate loose

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front exhaust hanger insecure

both rear tyres cracked