2008 Yamaha Yzf

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Fork yoke excessively deformed lock stop not working / missing causing steering to foul fairings (2.2.2 (d) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Clutch lever shortened (6.2.7 (b))

Exhaust noisy (8.1.1 (a))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Nearside Handlebar deformed but serviceable (2.2.1 (c) (i))

Offside Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Nail in tyre

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Clutch lever shortened (6.2.7 (b))

Exhaust noisy (8.1.1 (a))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust noisy (8.1.1 (a))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Drive chain excessively tight (6.1.7 (k) (i))

Exhaust noisy (8.1.1 (a))

Rear Wheel spindle loose (5.2.1 (c) (i))

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii))

Rear All position lamps not working (4.2.1 (a))

Rear Brake lever has restricted free movement (1.1.15 (e))

Rear reflector missing (4.8.2 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

front caliper requires a servive.

Drive chain excessively tight (6.2.1d)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Handlebar deformed (2.1.1b)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

front caliper requires a servive.

Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Drive chain sprocket slightly worn (6.2.1e)

Front Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)