2008 Suzuki Dr 125 Sm K9

Rear Brake caliper slightly damaged but function not impaired (1.1.16 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Steering movement slightly 'notchy' (2.2.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Headlamp aim too low (1.6)

Front Hydraulic brake control feels spongy (3.1.4a)

Rear Drive chain worn to excess (6.2.1e)

Front Steering movement slightly 'notchy' (2.2.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Steering movement slightly stiff (2.2.1a)

flaher rate close to limit 120min

Drive chain sprocket worn to excess Rear. Front may also be worn but is not visible to inspect. (6.2.1e)

Drive chain worn to excess (6.2.1e)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Horn control defective (1.7.2a)

Registration plate margin less than the minimum requirement (6.3.4g)

Flasher rate is only just less than 120/min

Front Brake disc(s) slightly worn (3.2.A1l)

Nail /screw in rear tyre

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering movement slightly 'notchy' (2.2.1b)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Indicator flasher rate is very close to the 120/min limit

Rear Brake disc(s) slightly worn (3.2.A1l)

Headlamp aim too low (1.6)

Nearside Rear Footrest missing (6.2.1a)

Offside Rear Footrest missing (6.2.1a)

Registration plate insecure (6.3.1b)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Indicator flasher rate is very close to the 120/min limit

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates a binding brake (3.3.A1a)