2008 Fiat Scudo

Brake disc worn, pitted or scored, but not seriously weakened front & rear (1.1.14 (a) (ii))

Play in steering rack inner joint(s)

Seat belt webbing slightly damaged or frayed both side front (7.1.2 (b) (ii))

Shock absorbers has slight external damage to the casing both side rear (5.3.2 (b))

Suspension arm ball joint has slight play both side front (5.3.4 (a) (i))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both side (6.2.2 (d) (i))

brake pipe, inner/outer sills, under body, suspension component's front to rear corroded

oil leak

Brake disc worn, pitted or scored, but not seriously weakened front & rear (1.1.14 (a) (ii))

Play in steering rack inner joint(s)

Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))

Seat belt webbing slightly damaged or frayed both side front (7.1.2 (b) (ii))

Shock absorbers has slight external damage to the casing both side rear (5.3.2 (b))

Suspension arm ball joint has slight play both side front (5.3.4 (a) (i))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both side (6.2.2 (d) (i))

brake pipe, inner/outer sills, under body, suspension component's front to rear corroded

oil leak

Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength holed underneath (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Oil leaking excessively from engine (8.4.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Registration plate inscription illegible cracked (0.1 (b))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Direction indicator slightly discoloured (4.4.3 (a))

nearside outer sill damaged

rear axle rusty

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Central Front Power steering component has slight seepage from a component (2.1.5 (a))

Central Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Items removed from driver's view prior to test

Central Rear Exhaust silencer insecure (8.1.1 (b) (i))

Front Brake pedal anti-slip provision missing (1.1.2 (c))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Rear Exhaust system insecure (6.1.2 (a))

Rear Stop lamp(s) switch with a delay in operation (4.3.2 (a) (ii))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Central Front Power steering component has slight seepage from a component (2.1.5 (a))

Central Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Items removed from driver's view prior to test

Central Front power steering leaking

Power steering close to minimum mark (2.1.5 (b) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Central Front power steering leaking

Front Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))

Power steering close to minimum mark (2.1.5 (b) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Exhaust system insecure (6.1.2 (a))

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust system not adequately supported (7.1.1)

Offside Front Ball joint has slight play (2.2.B.1f)

Nearside Ball joint has excessive play (2.2.B.1f)

Offside Ball joint has excessive play (2.2.B.1f)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)