2010 Honda Cr-v

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Little reserve on handbrake

Nearside Front Tyre worn close to legal limit/worn on edge Wearing on outside edge (5.2.3 (e))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Tyre worn close to legal limit/worn on edge Wearing on inside edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar linkage ball joint has slight play Nearside and offside (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Nearside and offside floor and inner sill area (5.3.6 (a) (i))

Rear Tyre worn close to legal limit/worn on edge Nearside and offside wearing on inside edges (5.2.3 (e))

Rear exhaust joint very rusty

Sub-frame corroded but not seriously weakened Front and rear also some suspension components (5.3.3 (b) (i))

Towbar bracket corroded

Vehicle floor corroded in various places

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Little reserve on handbrake

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar linkage ball joint has slight play Nearside and offside (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Nearside and offside (5.3.6 (a) (i))

Some front and rear suspension components corroded

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Little reserve on handbrake

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Anti-roll bar linkage ball joint has slight play Nearside and offside (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Nearside and offside (5.3.6 (a) (i))

Some front and rear suspension components corroded

Anti-roll bar linkage ball joint has slight play Nearside and offside rear (5.3.4 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Little reserve on handbrake

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside front inner wheel arch plastic cover loose

Oil leak, but not excessive (8.4.1 (a) (i))

Some front and rear suspension components slightly corroded

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Anti-roll bar linkage ball joint has slight play Nearside and offside rear (5.3.4 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Little reserve on handbrake

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside front inner wheel arch plastic cover loose

Oil leak, but not excessive (8.4.1 (a) (i))

Some front and rear suspension components slightly corroded

Battery insecure but not likely to fall from carrier Clamp missing (4.13 (a) (i))

Brake pad(s) wearing thin Nearside and offside front (1.1.13 (a) (ii))

Little reserve on handbrake

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Battery clamp missing

Exhaust flange corroded at middle to rear connection

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

No emissions detected

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

BOTH FRONT SHOCK ABSORBERS SHROUDS SPLIT

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)