2010 Honda Civic

Central Front Vehicle structure is corroded but structural rigidity is not significantly reduced Cross Member (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Side repeater flashing more than 120 times a minute (4.4.4 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Central Front Vehicle structure is corroded but structural rigidity is not significantly reduced Cross Member (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Side repeater flashing more than 120 times a minute (4.4.4 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Coolant leak ()

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Coolant leak ()

Brake disc worn, pitted or scored, but not seriously weakened both rears (1.1.14 (a) (ii))

Brake hose has slight corrosion to ferrule both rears (1.1.12 (f) (i))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Nail in tyre ()

Fluid leak, but not excessive water leak (8.4.1 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm rear bush (5.3.4 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim too high main beam (4.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Fluid leak, but not excessive water leak (8.4.1 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm rear bush (5.3.4 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)

Front Brake pad(s) wearing thin both sides (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Tyre pressure monitoring system warning lamp indicates a fault (4.1.D.4)

Windscreen wiper does not clear the windscreen effectively nearside blade split (8.2.2)

Front Brake pad(s) wearing thin both sides (3.5.1g)

Nail in offside rear tyre

Under-trays fitted obscuring some underside components

Nearside Headlamp aim too high (1.8)