2012 Mazda 3

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Suspension component corroded but not seriously weakened noth sides (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

general corrosion under the body

tested in wet condition

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Suspension component corroded but not seriously weakened noth sides (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

general corrosion under the body

tested in wet condition

Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Lower Suspension arm ball joint dust cover severely deteriorated nsf/osf (5.3.4 (b) (i))

Front Road wheel slightly distorted (5.2.2 (c) (i))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt os/ns (2.1.3 (g) (i))

Front Tyre worn close to legal limit/worn on edge osf/nsf (5.2.3 (e))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security os/ns (6.2.2 (d) (i))

Steering component mounting prescribed area is corroded but not considered excessive (2.1.2 (e) (i))

Suspension arm pin or bush worn but not resulting in excessive movement all front & rear - upper & lower (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced front to rear (6.1.1 (c) (i))

Front Suspension component ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Coil spring corroded (5.3.1 (b) (i))

general under body corrosion

under trays fitted

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Inner Axle swivel pins and bushes swivel pin and/or bush slightly worn both (5.1.2 (b) (i))

tested in wet condition general under body corroded

Driver's view of an obligatory external mirror significantly affected by an obstruction (3.1 (a) (ii))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Inner Axle swivel pins and bushes swivel pin and/or bush slightly worn both (5.1.2 (b) (i))

tested in wet condition general under body corroded

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Registration plate inscription illegible (0.1 (b))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front tyre both sidewalls damaged look like the tyre has been run flat

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

rear tyres wearing on inner edges