2002 Ford Fiesta Courier

Rear Registration plate lamp insecure (4.7.1 (c) (i))

Front All direction indicators not working both said (4.4.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear All direction indicators not working both said (4.4.1 (a) (ii))

Rear Registration plate lamp insecure (4.7.1 (c) (i))

Nearside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. low slower to rise 38% pads appear to have got hot ? (1.2.1 (b) (i))

exhaust is rusty

oil leak

rear number plate is poor

windscreen scuttle needs cleaning (may block drains)

Front Suspension arm pin or bush worn but not resulting in excessive movement both lower arm bushes are starting to de laminate (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

exhaust is rusty

rear number plate is poor

Front Suspension arm pin or bush worn but not resulting in excessive movement both arm bushes are perished (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

exhaust is rusty

oil leak

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Suspension arm pin or bush worn but not resulting in excessive movement both arm bushes are perished (5.3.4 (a) (i))

Nearside Front tyres is badly perished recommend this is replaced

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

exhaust is rusty

oil leak

front lower arm bushes are perished

front tyres are perished

oil leak

rear number plate is poor

both lower arm bushes are perished

exhaust is rusty

f/o/s and r/n/s tyre are perished

o/s inner c/v boot is perished and covered in oil

oil leak

rear number plate is poor

coolant toped up

front lower arm bushes are perished esp n/s

oil leak

rear number plate is poor

Suspension arm rubber bush deteriorated but not resulting in excessive movement both front esp n/s (2.4.G.2)

exhaust is rusty

oil leak

rear number plate is poor

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

exhaust rusty

r/n/s tyre perished

the clutch will need replacing very soon

Brakes imbalanced across an axle (3.7.B.5b)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

exhaust rusty

r/n/s tyre perished

the clutch will need replacing very soon

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

both front tyres low on tread and worn on edges esp inner !

oil leak (slight)

both front tyres worn at inner edge

exhaust rusty

f/n/s wheel damaged and tyre curbed

oil leak noted at front of engine (slight)

exhaust rusty

f/n/s strut noted weeping oil

oil leak

Offside Front position lamp(s) not working (1.1.A.3b)

exhaust rusty

f/n/s strut noted weeping oil

oil leak

Offside Side repeater incorrect colour (1.4.A.2f)

f/n/s tyre damaged at outer wall

f/n/s tyre damaged at outer wall

Nearside Front Lower Brake pipe inadequately clipped (3.6.B.1)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Front registration plate insecure (6.3.1b)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)