2005 Kia Picanto

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked in grey (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Windscreen washer provides insufficient washer liquid both jets (3.5 (a))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked in grey (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked in grey (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked in grey (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected Marked in grey (5.3.6 (a) (ii)) DANGEROUS

Front Coil spring corroded both (5.3.1 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Exhaust has a major leak of exhaust gases front flexi (6.1.2 (a))

Front Coil spring corroded both (5.3.1 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Upper Macpherson strut attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS

Coil spring corroded all four (5.3.1 (b) (i))

Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Coil spring corroded both (5.3.1 (b) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Front Coil spring corroded both (5.3.1 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Rear Coil spring corroded both (5.3.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Front Coil spring corroded both (5.3.1 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear coil spring corroded both (2.4.C.1b)

Rear coil spring corroded Both (2.4.C.1b)

Offside Front cracking in sidewall

Rear coil spring corroded both (2.4.C.1b)

Rear coil spring corroded (2.4.C.1b)

offside rear tyre slight cracking on side wall

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Offside Brake pipe slightly corroded (3.6.B.2c)

Rear coil spring corroded (2.4.C.1b)

offside rear tyre slight cracking on side wall

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Rear coil spring corroded (2.4.C.1b)

offside rear tyre cracking in sidewall

Rear coil spring corroded (2.4.C.1b)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)