MOT Status
ValidMileage
277,158 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Suspension arm ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both sides (2.1.3 (g) (i))
General corrosion to the under-body and wheel arches
Headlamp lens slightly defective Both sides (4.1.1 (b) (i))
Lower Integral body structure is corroded but structural rigidity is not significantly reduced Both sides (6.1.1 (c) (i))
Lower Integral body structure is repaired but structural rigidity is not significantly reduced Both sides (6.1.1 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Parking brake lever worn, but not excessively (1.1.6 (b) (i))
Rear Coil spring corroded Both sides (5.3.1 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive Both sides (7.1.1 (a) (i))
Suspension component corroded but not seriously weakened Various (5.3.3 (b) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Windscreen wiper blade defective Both sides (3.4 (b) (i))
Central Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Suspension arm ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both sides (2.1.3 (g) (i))
General corrosion to the under-body and wheel arches
Headlamp lens slightly defective Both sides (4.1.1 (b) (i))
Lower Integral body structure is corroded but structural rigidity is not significantly reduced Both sides (6.1.1 (c) (i))
Lower Integral body structure is repaired but structural rigidity is not significantly reduced Both sides (6.1.1 (d) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Parking brake lever worn, but not excessively (1.1.6 (b) (i))
Rear Coil spring corroded Both sides (5.3.1 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive Both sides (7.1.1 (a) (i))
Suspension component corroded but not seriously weakened Various (5.3.3 (b) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Windscreen wiper blade defective Both sides (3.4 (b) (i))
Brake pedal wearing smooth (1.1.2 (c))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Headlamp lens slightly defective both sides (4.1.1 (b) (i))
Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive both sides (7.1.1 (a) (i))
Lower Integral body structure is repaired but structural rigidity is not significantly reduced both sides. Welding patches. (6.1.1 (d) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Parking brake lever worn, but not excessively (1.1.6 (b) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Brake pedal wearing smooth (1.1.2 (c))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive both sides (7.1.1 (a) (i))
Headlamp lens slightly defective both sides (4.1.1 (b) (i))
Lower Integral body structure is repaired but structural rigidity is not significantly reduced Both sides. Welding patches. (6.1.1 (d) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Windscreen wiper blade defective both sides (3.4 (b) (i))
Brake pedal wearing smooth (1.1.2 (c))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive both sides (7.1.1 (a) (i))
Headlamp lens slightly defective both sides (4.1.1 (b) (i))
Lower Integral body structure is repaired but structural rigidity is not significantly reduced Both sides. Welding patches. (6.1.1 (d) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Windscreen wiper blade defective both sides (3.4 (b) (i))
weld repairs heavily under sealed
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Front Seat belt anchorage prescribed area is corroded but not considered excessive both sides sills (7.1.1 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides sills (5.3.6 (a) (i))
Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
general corrosion to under body and components
rear arches corroded both sides
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Central Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Exhaust has a minor leak of exhaust gases flexi' (6.1.2 (a))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Parking brake lever has little reserve travel
Front Exhaust has a minor leak of exhaust gases flexi' (6.1.2 (a))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Parking brake lever has little reserve travel
Front Steering rack has slight free play detected at steering wheel (2.3 (a) (i))
Nearside Rear Parking (secondary brake) grabbing slightly (1.3.1 (c))
Front Lower Suspension arm has slight play in a pin/bush both arms (2.4.G.2)
Rear Anti-roll bar has slight play in a pin/bush both (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside rear tyre stepped on inner edge
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside rear tyre stepped on inner edge
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Honda Accord?
Based on 2,311,969 MOT tests across 198,303 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LD06 ROU is a 2006 Honda Accord in Blue with a 2,204cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 75%.
Across all 2006 Honda Accord models, the average MOT pass rate is 74.3% with a typical mileage of 98,038 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Honda Accord fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 104,224 recorded failures. If you're considering buying LD06 ROU, it's worth having these areas checked by a mechanic before committing.
The Honda Accord typically stays on UK roads for around 33 years. At 20 years old, this Honda Accord is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of LD06 ROU?
You can check the full history of LD06 ROU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LD06 ROU registered?
LD06 ROU is a 2006 Honda Accord, first registered on 26 April 2006.
Is LD06 ROU safe to buy?
The MOT history for LD06 ROU shows 24 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LD06 ROU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LD06 ROU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.