2008 Honda Cr-v

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear exhaust joint corroded

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Inner Play in steering rack inner joint(s) ()

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Exhaust mounting defective rear connector corroded (6.1.2 (a))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust mounting defective - exhaust joint/mounting in poor condition (6.1.2 (a))

Front Windscreen wiper does not clear the windscreen effectively - wipers (3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Exhaust mounting defective - exhaust joint/mounting in poor condition (6.1.2 (a))

Exhaust mounting defective Rear exhaust joint/mounting in poor condition (6.1.2 (a))

o/s front fog lamp inoperative - pre 1 March 2018

Exhaust mounting defective Rear exhaust joint/mounting in poor condition (6.1.2 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect Dip aim and pattern (4.1.2 (c))

o/s front fog lamp inoperative - pre 1 March 2018

Dip headlamps dim

Rear exhaust joint/mounting in poor condition

Dip headlamps dim

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear exhaust joint/mounting in poor condition

Offside Rear Nail in tyre ()

Rear Exhaust mounting defective corroded (6.1.2 (a))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Nail in tyre ()

Rear Exhaust mounting defective corroded (6.1.2 (a))

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Front Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Stop lamp not working (1.2.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)