2008 Honda Cr-v

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Lower Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Front Tyre worn close to legal limit/worn on edge both 3mm (5.2.3 (e))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Rear Shock absorbers has slight external damage to the casing corroded (spring mount) (5.3.2 (b))

Offside Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Exhaust mounting defective joint corroded (6.1.2 (a))

Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both sides (2.1.3 (g) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Surface corrosion underbody

Tyre slightly damaged/cracking or perishing All four tyres (5.2.3 (d) (ii))

Front Suspension arm ball joint dust cover severely deteriorated offside and nearside dust covers perished (5.3.4 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement upper and lower arm bushes perished (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement upper and lower arm bush perished (5.3.4 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced offside and nearside inner sill (6.1.1 (c) (i))

Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement offside and nearside arm bushes perished (5.3.4 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)