2009 Honda Cbf 125 M-9

Handlebar fouling on the fuel tank or bodywork on full lock fouling on nose cone then full right lock applied (2.1.4 (b))

Handlebar restricted in free movement from lock to lock (2.1.4 (c))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Front Brake pad(s) incorrectly mounted brake pad pin insecure (1.1.13 (c)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm uneven wear (5.2.3 (e)) DANGEROUS

Throttle control functioning such that safe operation of the motorcycle is adversely affected revs up when turning left and cable incorrectly routed (6.2.7 (a) (ii)) DANGEROUS

Front Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front tyre is slightly perished in trad pattern

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Handlebar excessively deformed (2.2.1 (c) (i))

Headlamp not working on main beam switch is faulty, light will operate but will not stay on once released (4.1.1 (a) (ii))

Steering headbearing has excessive wear or free play free play (2.2.2 (f) (i))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front tyre has slight perishing in the tread

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Drive chain slightly tight (6.1.7 (k) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e))

Clutch lever bent (6.2.7 (b))

Clutch lever bent.

Drive chain sprocket worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Rear reflector on motorcycle obscured (1.4.2b)

Drive chain slightly loose (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))