2010 Yamaha Yzf

Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Offside Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Motorcycle structure is so deformed it is likely to adversely affect braking or steering both forks bent (6.1.1 (a) (ii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Motorcycle structure is deformed but structural rigidity is not significantly reduced fairings loose and damaged (6.1.1 (a) (i))

Offside Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Drive chain excessively loose (6.1.7 (c) (i))

Headlamp aim too low (4.1.2 (a))

Nearside Front Direction indicator missing (4.4.1 (a) (ii))

Offside Front Direction indicator missing (4.4.1 (a) (ii))

Rear Footrest missing (6.2.12 (a))

Exhaust noisy (8.1.1 (a))

Steering headbearing has slight free play (2.2.2 (f) (i))

Rear reflector missing (4.8.2 (a) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Steering headbearing has slight free play (2.2.2 (f) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Stop lamp not working (4.3.1 (a) (ii))

Offside Front Footrest insecure (6.2.12 (a))

Rear Brake pedal is bent and the brake cannot be readily applied (1.1.2 (d))

Rear reflector missing (4.8.2 (a) (ii))

Exhaust silencer likely to become detached (8.1.1 (b) (ii)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Offside Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Registration plate slightly loose (0.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear reflector missing (4.8.2 (a) (ii))

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear suspension bearing has slight free play (2.4.A2a(i))

Steering headbearing has slight free play (2.2.2)

Wheel alignment slightly misaligned. (2.5.1)

Direction indicator flashing more than 120 times per minute (1.5.1c)

Front position lamp incorrect colour (1.1.2a)

Headlamp aim too high (1.6)

Rear Footrest missing (6.2.1a)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear suspension bearing has slight free play (2.4.A2a(i))

Steering headbearing has slight free play (2.2.2)

Wheel alignment slightly misaligned. (2.5.1)

Central Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Direction indicators flashing more than 120 times per minute (1.5.1c)

Front position lamp incorrect colour (1.1.2a)

Headlamp aim too high (1.6)

Headlamp incorrect colour (1.2.1)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Direction indicators flashing more than 120 times per minute (1.5.1c)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Nearside Upper Handlebar mounting clamp bolt missing broken (2.1.1a) DANGEROUS

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake disc(s) slightly scored (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

number plate light not working

FRONT BRAKE PADS LOW

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Registration plate deteriorated (6.3.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))