2003 Honda Cbr 1100 X-3

Road spring corroded (5.3.1 (b) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement lower bush (5.3.4 (a) (i))

Inner Shock absorber has a serious fluid leak (5.3.2 (b))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Road spring corroded (5.3.1 (b) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement lower bush (5.3.4 (a) (i))

Front Brake disc(s) slightly worn (3.2.A1l)

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high would not ajust (1.6)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre valve stem slightly damaged (4.1.2c)

Steering movement slightly 'notchy' (2.2.1a)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))