2004 Honda Jazz

Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both sides rear (5.3.4 (a) (i))

Offside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear axle corroded

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Windscreen washer not working (3.5 (a))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Windscreen washer not working (3.5 (a))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both sides rear (5.3.4 (a) (i))

Offside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear axle corroded

Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Front Headlamp has a product on the light source but not seriously reducing light output Both (4.1.4 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both sides rear bushes (5.3.4 (a) (i))

Offside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Parking brake just met the required efficiency

Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Front Headlamp has a product on the light source but not seriously reducing light output Both (4.1.4 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both sides rear bushes (5.3.4 (a) (i))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Parking brake just met the required efficiency

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

underbody corrosion

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake disc significantly and obviously worn both (1.1.14 (a) (i))

Front Service brake excessively binding both (1.2.1 (f))

Nearside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords wall (5.2.3 (d) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Offside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement both top mount bushes (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both disc (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

slight mist of oil

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Stop lamp(s) not working both (4.3.1 (a) (ii))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

slight mist of oil

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Macpherson strut pin or bush worn but not resulting in excessive movement both top mount (5.3.4 (a) (i))

Front Service brake binding but not excessively both (1.2.1 (f))

Rear Service brake binding but not excessively both (1.2.1 (f))

Front Macpherson strut has slight movement at the upper attachment both top mounts (2.5.A.1c)

Front Tyre worn close to the legal limit both (4.1.E.1)

Rear both disc and pads worn

Front Macpherson strut has slight movement at the upper attachment both top mounts (2.5.A.1c)

Front Tyre worn close to the legal limit both (4.1.E.1)

Front position lamp(s) not working (1.1.A.3b)

Rear both disc and pads worn

Rear coil spring broken both (2.4.C.1a)

Rear fog lamp not working (1.3.2b)

Front Macpherson strut has slight movement at the upper attachment both top mounts (2.5.A.1c)

Rear Brake pad(s) wearing thin both (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Front Macpherson strut has slight movement at the upper attachment top mounts (2.5.A.1c)

Front Tyre worn close to the legal limit both (4.1.E.1)

Rear Brake pad(s) wearing thin both (3.5.1g)

Noise heard when driving

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear coil spring broken (2.4.C.1a)

Noise heard when driving

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Front Brake pad(s) wearing thin (3.5.1g)