2008 Mini Cooper S

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge worn smooth inner edge (5.2.3 (e))

Brake disc worn, pitted or scored, but not seriously weakened all heavily corroded (1.1.14 (a) (ii))

Front Headlamp lens slightly defective both cloudy (4.1.1 (b) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge edge bald (5.2.3 (e))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 205/45/17 (5.2.3 (d) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Brake disc worn, pitted or scored, but not seriously weakened all heavily corroded (1.1.14 (a) (ii))

Front Headlamp lens slightly defective both cloudy (4.1.1 (b) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge edge bald (5.2.3 (e))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge wearing on outer edge (5.2.3 (e))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge wearing on outer edge (5.2.3 (e))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

N/SF AND O/SF UPPER RUBBER STRUT MOUNTS SPLITTING

OIL LEAK (ADVISE INSPECTION)

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

N/SF AND O/SF UPPER RUBBER STRUT MOUNTS SPLITTING

OIL LEAK (ADVISE INSPECTION)

Nearside Rear Shock absorbers light misting of oil or has limited damping effect LIGHT MISTING OF OIL (5.3.2 (b))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Horn not working (1.6.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside rear tyre out of shape, inside tread.

front brake application uneven O/S 100. N/S 200. (3.7.B.2) DANGEROUS

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too high (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)