2008 Yamaha Yzf

All direction indicators not working (4.4.1 (a) (ii))

Front Stop lamp not working (4.3.1 (a) (ii))

Horn sound not in accordance with requirements (7.7 (c))

Indicator switch inoperative (4.4.2 (a) (ii))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) DANGEROUS

Chain corroded

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front sprocket cover missing

Nearside mirror missing

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Wheel alignment slightly misaligned (2.4 (a))

drive chain guide broken

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Direction indicator obviously incorrectly positioned (4.4.3 (a))

Front Position lamp missing (4.2.1 (a))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake master cylinder insecure reservoir (1.1.10 (c))

Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Rear Inner Brake pad(s) close to minimum limit (1.1.13 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

wiring from frame to headlight and clocks insecure.

Stop lamp not working (4.3.1 (a) (ii))

Exhaust noisy (8.1.1 (a))

Front Valve stem slightly damaged (5.2.3 (j))

Front wiring hanging on front fender

Offside Rear Brake caliper slightly damaged but function not impaired sliding bush rubber missing (1.1.16 (a) (i))

Offside Rear Brake caliper slightly damaged but function not impaired slight movement in calliper mount to rear arm bracket (1.1.16 (a) (i))

Offside Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement slight movement in linkage (5.3.4 (a) (i))

Rear Valve stem slightly damaged (5.2.3 (j))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Exhaust noisy (8.1.1 (a))

Front Valve stem slightly damaged (5.2.3 (j))

Front wiring hanging on front fender

Offside Rear Brake caliper slightly damaged but function not impaired sliding bush rubber missing (1.1.16 (a) (i))

Offside Rear Brake caliper slightly damaged but function not impaired slight movement in calliper mount to rear arm bracket (1.1.16 (a) (i))

Offside Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement slight movement in linkage (5.3.4 (a) (i))

Rear Valve stem slightly damaged (5.2.3 (j))

Rear reflector missing (4.8.2 (a) (ii))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Nearside Front Brake disc insecure 1 bolt loose (1.1.14 (a) (ii))

Offside Rear Brake caliper travel close to excessive slight movement in calliper mount bracket (1.1.16 (e) (i))

Offside Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement movement in linkage (5.3.4 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Offside Front Stop lamp missing (4.3.1 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Headlamp aim too low (4.1.2 (a))

Nearside Front Clutch lever shortened (6.2.7 (b))

Offside Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement movement in linkage (5.3.4 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Steering headbearing has slight free play (2.2.2 (f) (i))

Offside Exhaust noisy (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Offside Drive chain excessively loose (6.2.1d)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Offside Exhaust noisy (7.1.2)

both levers damaged

Drive chain excessively loose (6.2.1d)

Footrest missing both rear (6.2.1a)

Nearside Front Direction indicators not working (1.5.1c)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension component loose linkage bolts (2.4.A.1a) DANGEROUS

both levers damaged

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(i))