2012 Yamaha Ybr 125

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake excessively binding (1.2.1 (f))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Drive chain worn to excess (6.1.7 (c) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Front Position lamp not working (4.2.1 (a))

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords multiple cuts/tears due to tyre perishing (5.2.3 (d) (i))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Handlebar mounting insecure (2.2.1 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

front tyre flat

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Headlamp insecure (4.1.1 (c))

Rear Brake excessively binding (1.2.1 (f))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain sprocket worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Drive chain slightly loose (6.2.1d)

Registration plate incorrect (6.3.1a)