2013 Yamaha Ybr

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake disc contaminated (1.1.14 (b))

Front Brake pad(s) contaminated (1.1.13 (b))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Front Brake caliper leaking and braking performance affected (1.1.16 (b) (ii)) DANGEROUS

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Fuel cap ineffective unable to open at time of test (6.1.3 (b) (i))

Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))

Nearside Rear Suspension arm pin or bush excessively worn Swingarm Bush/bearing (5.3.4 (a) (i))

Rear Registration plate insecure Broken Tapped together (0.1 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Front Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Nearside Front footrest badly bent

Offside Front Footrest Badly Bent

Front Tyre worn close to the legal limit (5.2.3 (e))

Headlamp aim too high (4.1.2 (a))

Nearside Direction indicator flashing less than 60 times a minute (4.4.4 (a))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain excessively tight (6.1.7 (k) (i))

Front Brake caliper insecure (1.1.16 (c) (i))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Rear Footrest insecure Bolt Missing (6.2.12 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Throttle operating incorrectly (6.2.7 (a) (i))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Footrests Bent

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Headlamp aim too high (4.1.2 (a))

Rear Stop lamp emits other than a steady red light (4.3.3 (a) (ii))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Rear Stop lamp not working (4.3.1 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Shock absorber has a reduced damping effect Stiff (5.3.2 (b))

Front Stop lamp emits other than a steady red light (4.3.3 (a) (ii))

Headlamp aim too far to the right (4.1.2 (a))

Headlamp aim too high (4.1.2 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Headlamp bracket misaligned

Meters loose

Registration plate deteriorated but not likely to be misread (0.1 (b))

Shock absorber has a reduced damping effect Stiff (5.3.2 (b))

Front Position lamp not working (4.2.1 (a))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

engine leaking oil when running

Front Tyre worn close to the legal limit (5.2.3 (e))

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Front suspension assembly component excessively bent (2.3.1)

Offside Front suspension assembly component excessively bent (2.3.1)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))