MOT Status
ExpiredMileage
149,972 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Horn not working (7.7 (a))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Front Direction indicator not working (4.4.1 (a) (ii))
Nearside Front Shock absorbers has an excessively worn bush (5.3.2 (c))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (jacking point) (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front All direction indicators not working (4.4.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
both rear arches corroded
Nearside Front Direction indicator not working (4.4.1 (a) (ii))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Direction indicator not working (4.4.1 (a) (ii))
Nearside Headlamp light intensity severely reduced dip (4.1.4 (a))
Offside Front Position lamp not working (4.2.1 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
slight exhaust blow from n/s cat
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front coil spring fractured (2.4.C.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Stop lamp not working (1.2.1b)
Rear Registration plate lamp not working (1.1.C.1d)
Front wheel bearing has slight play (2.5.A.3c)
Offside Front Headlamp damaged but light output not reduced (1.7.5a)
nearside front exhaust bracket has a bolt snapped out.the other bolt is holding it securely
offside front tyre slightly worn on outer edge
slight fluid seepage from gearbox
How Reliable is the Chrysler-jeep Crossfire?
Based on 12,200 MOT tests across 677 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LE04 MKC is a 2004 Chrysler-jeep Crossfire in Grey with a 3,180cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 72%.
Across all 2004 Chrysler-jeep Crossfire models, the average MOT pass rate is 74.5% with a typical mileage of 57,991 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Chrysler-jeep Crossfire fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 389 recorded failures. If you're considering buying LE04 MKC, it's worth having these areas checked by a mechanic before committing.
The Chrysler-jeep Crossfire typically stays on UK roads for around 23 years. At 22 years old, this Chrysler-jeep Crossfire is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of LE04 MKC?
You can check the full history of LE04 MKC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LE04 MKC registered?
LE04 MKC is a 2004 Chrysler-jeep Crossfire, first registered on 29 July 2004.
Is LE04 MKC safe to buy?
The MOT history for LE04 MKC shows 25 tests with a 72% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LE04 MKC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LE04 MKC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.