MOT Status
ExpiredMileage
240,768 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Inner Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp aim unable to be tested (4.1.2 (b))
Offside Headlamp light intensity severely reduced (4.1.4 (a))
Offside Rear Inner Position lamp not working (4.2.1 (a) (ii))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Rear Outer WHEEL ARCH HEAVILY CORRODED
Offside Rear WHEEL ARCH HEAVILY CORRODED
DASH LIGHTS NOT WORKING
Nearside wheel arch corroded
Offside rear wheel arch corroded
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside wheel arch corroded
Offside rear wheel arch corroded
Nearside Rear Outer Outer rear quarter panel corroding but not excessive
Offside Rear Outer Outer rear quarter panel corroding but not excessive
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i))
Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i))
Offside Rear Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii))
Offside Rear Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Outer Outer rear quarter panel corroding but not excessive
Offside Rear Outer Outer rear quarter panel corroding but not excessive
Oil leak, but not excessive (8.4.1 (a) (i))
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected by suspension arm (5.3.6 (a) (ii)) DANGEROUS
Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner sill section (5.3.6 (a) (ii)) DANGEROUS
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Suspension arm mount (5.3.6 (a) (ii)) DANGEROUS
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Rear fog lamp missing (1.3.2a)
Rear fog lamp not working (1.3.2b)
Nearside Rear tyre is perishing
Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt both sides (2.2.C.1c)
Rear fog lamp slightly discoloured (1.3.2e)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear fog lamp not working (1.3.2b)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda Bongo Friendee?
Based on 13,340 MOT tests across 1,062 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
LE53 HGY is a 2003 Mazda Bongo Friendee in Silver with a 1,990cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 57.9%.
Across all 2003 Mazda Bongo Friendee models, the average MOT pass rate is 76.8% with a typical mileage of 122,473 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo Friendee fails its MOT is fog lamp not working, accounting for 259 recorded failures. If you're considering buying LE53 HGY, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo Friendee typically stays on UK roads for around 31 years. At 23 years old, this Mazda Bongo Friendee is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of LE53 HGY?
You can check the full history of LE53 HGY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was LE53 HGY registered?
LE53 HGY is a 2003 Mazda Bongo Friendee, first registered on 31 December 2003.
Is LE53 HGY safe to buy?
The MOT history for LE53 HGY shows 19 tests with a 57.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does LE53 HGY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on LE53 HGY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.