2008 Ford Ka

Front Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wing (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wing (6.1.1 (c) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wing (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wing (6.1.1 (c) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake hydraulic reservoir fluid level below minimum level (1.1.10 (d) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake master cylinder below minimum mark (1.1.10 (d) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))

Brake master cylinder below minimum mark (1.1.10 (d) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge outer edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor pan (6.1.1 (c) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge splitting / cracking. 3mm (5.2.3 (e))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor pan (6.1.1 (c) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor pan (6.1.1 (c) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge splitting / cracking. 3mm (5.2.3 (e))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor pan (6.1.1 (c) (i))

Offside Headlamp aim too low (4.1.2 (a))

Nearside Front Vehicle structure has slight corrosion floor pan (6.1.B.2)

Nearside Front Vehicle structure has slight corrosion outer sill (6.1.B.2)

Nearside Rear Tyre worn close to the legal limit splitting / cracking. 3mm (4.1.E.1)

Offside Front Vehicle structure has slight corrosion floor pan (6.1.B.2)

Offside Headlamp insecure internal (1.7.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Front Vehicle structure has slight corrosion floor pan (6.1.B.2)

Nearside Front Vehicle structure has slight corrosion outer sill (6.1.B.2)

Nearside Rear Tyre worn close to the legal limit splitting / cracking. 3mm (4.1.E.1)

Offside Front Vehicle structure has slight corrosion floor pan (6.1.B.2)

Front both tyres worn more so inner and outer edges advise wheel alignment checks

Front brake discs worn / lipped

Nearside Front Tyre worn close to the legal limit 3mm (4.1.E.1)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Tyre worn close to the legal limit 3mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit 3mm (4.1.E.1)

Rear both tyres cracking / perished

Rear brakes squeaking / noisey

Front both tyres worn more so inner and outer edges advise wheel alignment checks

Front brake discs worn / lipped

Nearside Front Tyre worn close to the legal limit 3mm (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Tyre worn close to the legal limit 3mm (4.1.E.1)

Offside Headlamp aim too high (1.8)

Offside Rear Tyre worn close to the legal limit 3mm (4.1.E.1)

Rear both tyres cracking / perished

Rear brakes squeaking / noisey

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear tyres perished and cracked

Offside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)