2003 Aprilia RS125

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Drive chain slightly tight (6.2.1d)

front fender missing

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly tight (6.2.1d)

front fender missing

Brake pedal pivots slightly worn (3.1.3a)

Chain guard loose

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front mudguard missing

Fuel pipe slightly perished

Nearside front footrest bracket slightly bent

Rear Brake disc(s) slightly scored (3.2.A1l)

Seat hump missing

Brake pedal is positioned so that the brake cannot be readily applied (3.1.3c)

Drive chain excessively tight (6.2.1d)

Fairings insecure and likely to impede the steering (2.1.2e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front wheel has a missing wheel bolt(s) (4.2.3a)

Front wheel spindle securing nut locking device insecure (2.3.3a)

Fuel cap sealing washer missing (7.2.2c)

Fuel system component insecure (7.2.1b)

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Headlamp switch insecure (1.2.4)

Horn not working (1.7.3a)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Front Footrest insecure (6.2.1a)

Rear Footrest missing (6.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Stop lamp affected by the operation of another lamp (1.3.2)

Brake pedal pivots slightly worn (3.1.3a)

Chain guard loose

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre valve stem slightly damaged (4.1.2c)

Fuel pipe slightly perished

Nearside front footrest bracket slightly bent

Rear Brake disc(s) slightly scored (3.2.A1l)

Riders seat loose

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Drive chain sprocket slightly worn (6.2.1e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear suspension bush has excessive free play (2.4.A2a(i))

Steering headbearing has excessive free play (2.2.2)

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Drive chain sprocket slightly worn (6.2.1e)

Horn not loud enough to be heard by another road user (1.7.3a)

Registration plate characters incorrectly spaced (6.3.4a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front wheel bearings have excessive free play (2.3.5b)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)