2003 Piaggio Vespa

Brake hose slightly damaged (1.1.12 (b) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Steering movement slightly 'notchy' (2.2.1b)

Rear Exhaust mounting deteriorated. (7.1.1.c)

front mudgaurd missing at time of test

indicator switch slightly defective

lower exhaust bolt missing(still secure)

Front Floor brake test indicates a binding brake (3.3.C2c)

front mudgaurd missing at time of test

indicator switch slightly defective

lower exhaust bolt missing(still secure)

Front Lower Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1b)

Steering movement slightly 'notchy' (2.2.1b)

Rear Rear suspension bush has slight free play (2.4.A2a(i))

Exhaust is leaking and excessively noisey (7.1.1b)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Brake master cylinder insecurely mounted (3.2.B1a)

Steering movement excessively rough with the wheel raised (2.2.1b)

Nail in rear tyre