2004 Aprilia Mx 125

Clutch lever shortened (6.2.7 (b))

Front Exhaust slightly loose (6.1.2 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Front Brake drum worn, but not excessively (1.1.14 (a) (i))

MAIN BEAM TELL TALE STAYING ON

Front Headlamp insecure (4.1.1 (c))

Fuel cap missing (6.1.3 (b) (i))

Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Rear Wheel excessively distorted (5.2.2 (c) (i))

Rear Wheel spoke excessively loose (5.2.2 (d))

Rear Brake fluid not visible (1.1.10 (d) (iii)) DANGEROUS

Rear Wheel damaged or distorted to the extent that control of the motorcycle is likely to be adversely affected (5.2.2 (c) (ii)) DANGEROUS

Rear Position lamp insecure (4.2.1 (c) (i))

Registration plate slightly loose (0.1 (a))

Wheel alignment slightly misaligned Rear wheel alignment (2.4 (a))

Drive chain slightly loose (6.2.1d)

Exhaust mounting deteriorated. (7.1.1.c)

Front Brake disc(s) slightly scored (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Horn not working (1.7.3a)

Rear reflector on motorcycle missing (1.4.1)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp damaged and function impaired (1.2.3a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Brake pedal insecure (3.1.2a)

Rear Exhaust noisy (7.1.2)

rear footrests not fitted at time of test

Front Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Front wheel bearings have excessive free play (2.3.5b)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Brake disc(s) excessively worn (3.2.A1l)

Rear Exhaust markings indicating not for road use or similar wording (7.1.4)

Rear Exhaust mounting missing (7.1.1c)

Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Registration plate with character(s) which are not the correct height (6.3.4a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Wheel spoke missing (4.2.1b)

Upper Steering headbearing has excessive free play (2.2.2)

Front Front wheel bearings are slightly rough (2.3.5b)

Rear suspension bush has slight free play (2.4.A2a(i))

rear brake pivot bolt turns when pedal pressed

rear footrests not fitted at time of test

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Rear Drive chain excessively loose (6.2.1d) DANGEROUS

Rear Floor brake test indicates a sticking brake (3.3.C2c) DANGEROUS

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) DANGEROUS

Rear Exhaust noisy (7.1.2)

Rear Wheel alignment slightly misaligned. (2.5.1)

Chain guard missing

Rear Shock could be better

Front Direction indicator missing (1.5.1a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Chain guard missing

Rear Tyre worn close to the legal limit (4.1.3(ii))

Headlamp aim beam image kick up to the offside (1.6)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear mono-shock pivot worn but not excessive (2.4.B.4)