2004 BMW Z4

Brake pad(s) worn down to wear indicator Both front (1.1.13 (a) (i))

Fuel cap sealing device deteriorated slightly crack

Macpherson strut mounting damaged but not seriously weakened Both front upper (5.3.3 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Obligatory mirror slightly loose (3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Coil spring corroded Both rear (5.3.1 (b) (i))

Coolant level low

Fuel cap sealing device deteriorated slightly crack

Nearside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Inner wall deep cuts (5.2.3 (d) (i))

Suspension arm pin or bush excessively worn Both front lower rear bushes worn excessive movement (5.3.4 (a) (i))

Windscreen wiper does not clear the windscreen effectively Both front split & smearing (3.4 (b) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm Worn below legal limit 225/45/ZR 17 94W (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm Worn below legal limit 225/45/ZR 17 94W (5.2.3 (e)) DANGEROUS

Coil spring corroded Both rear slightly corroded (5.3.1 (b) (i))

Coolant level very low

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive Slight oil leak cam cover area (8.4.1 (a) (i))

Fuel cap,sealing device crack,perish

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm 225/45/R17 91W RFT (5.2.3 (e)) DANGEROUS

Fuel cap,sealing device crack,perish

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge Very close to legal limit,wearing inner edge 2 mm (5.2.3 (e))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords Inner wall (5.2.3 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Tyre worn close to legal limit/worn on edge NS/OS (5.2.3 (e))

Front Tyre worn close to legal limit/worn on edge NS/OS/inner edges (5.2.3 (e))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp insecure (1.7.3)

Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)