2002 Piaggio ET2

Front Brake caliper leaking (1.1.16 (b) (i))

Front Brake pad(s) contaminated (1.1.13 (b))

Headlamp aim too low (1.6)

Rear Roller brake test indicates a severely grabbing brake (3.3.A1b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp switch faulty (1.2.4)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Steering movement slightly 'notchy' (2.2.1a)

Steering movement slightly 'notchy' (2.2.1b)

front brake binding

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Steering movement slightly 'notchy' (2.2.1a)

Steering movement slightly 'notchy' (2.2.1b)

front brake binding

tyre pressure low (pumped up)

Steering movement slightly 'notchy' (2.2.1a)

Steering movement slightly 'notchy' (2.2.1b)

Front Front wheel bearings have slight free play (2.3.5b)

Rear Tyre worn close to the legal limit (4.1.3(i))

front tyre has uneven wear

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Front wheel bearings have slight free play (2.3.5b)

Front Headlamp aim too high (1.6)

Fuel cap sealing washer missing (7.2.2c)

Rear Tyre worn close to the legal limit (4.1.3(i))

front tyre has uneven wear

Front Tyre worn close to the legal limit (4.1.3(ii))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Steering headbearing has slight free play (2.2.2)