2002 Ccm R 30 Supermoto

Front Brake binding but not excessively (1.2.1 (f))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Headlamp aim too high (4.1.2 (a))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened Brake disc worn and pitted. (1.1.14 (a) (ii))

Offside Front Suspension rod corroded but not seriously weakened Fork leg stanchion corroded. (5.3.3 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened Brake disc worn and pitted. (1.1.14 (a) (ii))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Headlamp not working on main beam (4.1.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened Brake disc worn and pitted. (1.1.14 (a) (ii))

Offside Front Suspension rod corroded but not seriously weakened Fork leg stanchion corroded. (5.3.3 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened Brake disc worn and pitted. (1.1.14 (a) (ii))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake disc contaminated oil (1.1.14 (b))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Brake disc contaminated oil (1.1.14 (b))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Headlamp aim too high (4.1.2 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake disc(s) slightly pitted (3.2.A1l)

Front Brake disc(s) slightly scored (3.2.A1l)

Nearside Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Rear suspension component slightly corroded. (2.4.A.1a)

Front Direction indicators not working (1.5.1c)

Front Fuel system component insecure (7.2.1b)

Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Rear Direction indicator missing (1.5.1a)

Rear Registration plate delaminated (6.3.1.d)

Rear Riders seat insecure (6.2.1a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear Rear suspension component slightly corroded. (2.4.A.1a)

Rear Drive chain slightly loose (6.2.1d)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Drive chain slightly loose (6.2.1d)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Brake pedal pivots slightly worn (3.1.3a)

Front Front position lamp insecure (1.1.1c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Drive chain worn to excess (6.2.1e)

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Brake pedal pivots slightly worn (3.1.3a)

Front Riders seat insecure (6.2.1a)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Rear Brake component cracked and seriously reduced in strength (3.2.A1)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Registration plate characters laid out in an incorrect format (6.3.4f)

Rear Roller brake test indicates a binding brake (3.3.A1a)