2002 Yamaha YZF600

Headlamp mask fitted

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Headlamp mask fitted

Offside Rear Direction indicator insecure (4.4.1 (c) (i))

Front Brake excessively binding (1.2.1 (f))

Offside Front Direction indicator not working Broken off and hanging (4.4.1 (a) (ii))

Throttle operating incorrectly Cables routed incorrectly (6.2.7 (a) (i))

Front Brake hose has slight corrosion to ferrules both (1.1.12 (f) (i))

Rear Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake excessively binding (1.2.1 (f))

Headlamp aim too low (4.1.2 (a))

Front Brake hose has slight corrosion to ferrules both (1.1.12 (f) (i))

Rear Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Shock absorber insecurely attached (5.3.2 (a) (i))

Front Brake disc(s) slightly pitted (3.2.A1l)

Nearside steering lock slightly damaged

Front Floor brake test indicates a binding brake (3.3.C2c)

Headlamp insecure Front sub frame (1.2.3b)

Front Brake disc(s) slightly pitted (3.2.A1l)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Nearside mirror slightly loose

Nearside steering lock slightly damaged

Nearside Handlebar deformed (2.1.1b)

Offside Handlebar deformed (2.1.1b)

Drive chain slightly tight (6.2.1d)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Rear Direction indicators not working (1.5.1c)

rear brake pads low

both tyres seriously under inflated

Nearside Steering control handlebar movement restricted by trapped cables (2.1.2c)

Offside Front Brake locking device missing (3.2.A1e) DANGEROUS

Front shock absorber has light misting of stanchion (2.3.3)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front mudguard insecure (2.3.7)

Offside Front Handlebar deformed (2.1.1b)

Rear Exhaust markings indicating not for road use or similar wording (7.1.4)

Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Front shock absorber has light misting of stanchion (2.3.3)